• Stationary Showers
  • Oscillating Showers
  • Micro-Oscillating Showers

H & T offers a wide selection of various models of showers. Each product is specially designed and built to suit customer specific applications. Made entirely of stainless steel, the showers are suitable for low and high pressure applications and are available in any pipe size, length and model.

Shower pipes are available with or without internal brush cleaning arrangement.


Stationary Showers that is fabricated completely in Stainless Steel. These showers are put to various uses e.g. Fan jet showers for foam killing action in the head box, fish tail showers for cleaning the wire returning rolls etc. besides, the stationary showers offered by us can be availed at the most affordable prices.


·         Cleans the wire returning rolls

·         Foam killing action in the head box



We are a prominent manufacturer of a wide array of Oscillating Showers that is highly in demand in the market. These are very high pressure showers being used for cleaning felt or wire so that smooth running of the machine can be ascertained. The oscillation is provided either by pneumatic or electro-mechanical method.

In this type of shower, oscillation is provided by a geared electric motor, crank and shaft drive. The stroke length of the shower is 110-1 50mm, but can be changed. Minimum number of oscillations is 20 per minute but can be more if needed. Crank & shaft drive are usually covered with M.S. sheet but can be supplied in S.S. if desired. Shaft is supported on brass roller. The standard distance between two nozzles has been kept at 100 mm.

For meticulous, uniform cleaning of the entire area of the felt or wire H & T offers its top-most model MICRO TRAVEL NEEDLE JET SHOWER. It does its cleaning operation with unmatched thoroughness. High Pressure oscillating showers of traditional design tend to leave diamond shapes of cleaned/un-cleaned and over cleaned portions on the felt or wire. However, micro-travel Mechanism of this shower eliminates this inherent weakness and ensures that uniformly spaced nozzles cover the area between any two of them by travelling at predetermined suitable speed depending upon machine’s speed. This micro-travel to and fro movement is caused by an electric double geared motor and crank drive. The standard distance between two nozzles has been kept at 1OOmm, but can be reduced – if so desired by the customer. However, pump of higher capacity would be needed to maintain same pressure for greater number of nozzles. With micro travel drive, the supplied dome shaped needle jet nozzles have nylon brush to keep the nozzles clean. The brush is to be rotated manually to clean the nozzle as and when required.


– Shower Bar in SS 304/ SS 316

– Oscillator with Geared Drive

– Fresh Water Filter in SS 304/SS 316

– Shower Mounting Brackets in SS304/SS 316 with Brass Rollers

Questionnaire for Showers

  1. Wire/Screen Width –
  1. Machine Frame Centre Distance –
  1. Type of Oscillator Required –
  1. Shower Required with Brush Cleaning System- Yes/No


Needle Jet Nozzle 

We are a prominent manufacturer of a wide array of Needle Jet Nozzles that is attached to very high pressure needle jet showers and used for continuous cleaning operation of felt or wire. The nozzle is available in two models. Disk Type Nozzle is made up of three pieces base block, locking nut and the disk. Being the main functional part, only disk wears down and needs occasional replacement. One Piece Needle Jet Nozzle offers greater security by eliminating any chances of accidental loosening of it.


  • SS-304 / SS-316

Appreciated for

  • Longer life
  • High pressure impact
  • Low Cost of Replacement


  • Felt or Wire Cleaning
  • Edge cutting in paper making

Fish Tail Nozzle

We are a leading manufacturer of a comprehensive range of Fish Tail Nozzle that is used for continuous washing of wire return rolls for removal of any fiber. This nozzle generates fish tail type spray of water and is very effective. It consists of universal base block, lock nut and the fish tail tip and also has low running cost, owing to low water consumption in comparison with traditional drilled showers.


  • SS-304 / SS-316

Appreciated for

  • Longer Life
  • High Impact at Low pressure
  • Low cost of replacement


Fan Jet Nozzle

 Available with us is an impeccable array of high quality Fan Jet Nozzle that is highly in demand in the market. When attached to a stationary shower over the head box of a machine, this nozzle creates a cone shaped mist and performs its foam-killing action very effectively. Our array of Fan Jet Nozzles is widely appreciated by the clients, owing to its high pressure impact and wear resistant properties. Besides, customers can also be eased by availability of these nozzles at the most economical prices.


  • Brass/ SS- 304
  • Uses
  • Foam Killing
  • Dust suppression


Edge Cutter Nozzle

Avail from us an immaculate gamut of Edge Cutter Nozzles that are designed in compliance with the highest international standards. These nozzles generate extremely fine (usually 0.5 mm) pencil of water of very high pressure which cuts through the paper edges very neatly. With a view to avoid choking of the fine-holed disk, a filter is built into the nozzle to filter out all dust particles out of water.


SS-304/ SS -316

Leave a Reply

Your email address will not be published. Required fields are marked *